Tools - Metal Working Tools |
|
|
 |
ARC360 HOLE CUTTERThe tools on the market for cutting lightning holes in your airframe parts have never impressed me much especially if the holes are larger than a couple of inches in diameter. Panel knock put punches and hole saws work well for holes that are aren’t too big but it gets harder and more expensive as the size of the hole increases. View more details |
| 12-01977 | NOAH ARC-360 HOLE CUTTER | $98.95 | 
| |
|
 |
MAGNUM BENDERFor many homebuilders, the production of high quality aircraft metalwork can be a daunting prospect. There can be hundreds of intricate fittings to produce and many will require accurate bending. View more details |
| 12-01550 | MAGNUM BENDER STANDARD | $852.00 |
| | 12-01551 | MAGNUM BENDER METRIC | $1065.00 |
| |
|
|
|
 |
PANEL BEATER HAMMER & DOLLY KITThe most widely used selection of panel beaters and dollies for most metal shaping needs, provessional grade in a molded plastic box. Each hammer is color-coded for either shrinking (blue) or stretching (red) forming tasks. View more details |
| 12-01011 | PANEL BEATER & DOLLY KIT | $144.95 |
| |
|
|
|
 |
JOGGLE-360 FABRICATION TOOLAdjust the guide rollers to the desired set back or width of joggle by rotating the Eccentric Guide Roller Adjustment Screws with an Allen wrench. View more details |
| 12-02252 | NOAH JOGGLE-360 FAB TOOL | $99.00 |
| |
|
|
|
 |
ECONOMICAL CHIP CHASERThis handy, economical tool removes chips and burrs on metal between sheets after rivet holes have been drilled. A recommended tool for any aircraft builder involved with sheet metal work. View more details |
| 12-01597 | ECON CHIP CHASER 2.5" | $2.85 |
| | 12-01476 | ECON CHIP CHASER 5.5" | $3.25 |
| |
|
|
|
|
|
 |
CHIP CHASER #TP70Ideal for removing chips and burrs from between metal after drilling rivet holes. Each chaser features a plastic molded handle and flexible steel blade with hook on the end. Blades are 5.5 and 2.5 long. View more details |
| 12-01304 | CHIP CHASER #TP70 | $6.20 |
| |
|
 |
BULLSEYE PICKSThe bullseye pick was originally used in the dent repair/collision trade, but also works great for restoration work. These are ideal to reach in around the edge of a panel, around a gusset, or into a blind area to repair the dent from the backside. View more details |
| 12-02292 | 15" BULLSEYE PICK | $84.25 |
| | 12-02293 | 25" BULLSEYE PICK | $94.75 |
| |
|
