CAMLOC 2600 FASTENERS from Aircraft Spruce

Log In - Register

Hardware - Fasteners

CAMLOC 2600 FASTENERS

2600 STUD LENGTH SELECTION
Total material thickness “G” consists of the thickness of all materials to be fastened. This must include the thickness of the material “P” to which the stud assembly is attached, the material “F” to which the receptacle is attached plus gaskets (if used) and allowance for paint or other protective finishes. If the total thickness is near the upper limit of the stud grip range, the next longer stud should be used. This will still maintain positive locking of the fastener under vibration.

P (panel thickness)..................... .062
F (frame thickness................... + .062
GRIP (total thickness).............. = .124

STUD SELECTION TABLE Using 212-12 Receptacle
Total Grip Thickness	Use 2600	Use 2700
.020-.059	2600-1	2700-1
.060-.089	2600-2	2700-2
.090-.119	2600-3	2700-3
.120-.149	2600-4	2700-4
.150-.179	2600-5	2700-5
.180-.209	2600-6	2700-6
.210-.239	2600-7	2700-7
.240-.269	2600-8	2700-8
.270-.299	2600-9	2700-9
.300-.329	2600-10	2700-10
.330-359	2600-11	2700-11
.360-389	2600-12	2700-12
.390-.419	2600-13	2700-13
.420-.449	2600-14	2700-14


CAD PLATED SLOTTED

Description	Part Number	Price	Buy
CAMLOC FASTENERS 2600-1 STUDS	2600-1	$3.60
CAMLOC FASTENERS 2600-2 STUDS	2600-2	$2.85
CAMLOC FASTENERS 2600-3 STUDS	2600-3	$1.89
CAMLOC FASTENERS 2600-4 STUDS	2600-4	$2.60
CAMLOC FASTENERS 2600-5 STUDS	2600-5	$2.45
CAMLOC FASTENERS 2600-6 STUDS	2600-6	$3.45
CAMLOC FASTENERS 2600-7 STUDS	2600-7	$2.95
CAMLOC FASTENERS 2600-8 STUDS	2600-8	$3.65
CAMLOC FASTENERS 2600-9 STUDS	2600-9	$2.65
CAMLOC FASTENERS 2600-10 STUDS	2600-10	$3.75
CAMLOC FASTENERS 2600-11	2600-11	$3.65
CAMLOC-FASTENERS 2600-12 STUDS	2600-12	$3.90
CAMLOC FASTENERS 2600-13 STUDS	2600-13	$3.40
CAMLOC FASTENERS 2600-14 STUDS	2600-14	$3.95


STAINLESS STEEL SLOTTED

Description	Part Number	Price	Buy
CAMLOC FASTENER 2600-1S	2600-1S	$4.15
CAMLOC FASTENER 2600-2S	2600-2S	$4.15
CAMLOC FASTENER 2600-3S	2600-3S	$4.10
CAMLOC FASTENER 2600-4S	2600-4S	$3.95
SS CAMLOC FASTENER 2600-5S	2600-5S	$3.90
CAMLOC FASTENER 2600-6S	2600-6S	$3.40
CAMLOC FASTENER 2600-7S	2600-7S	$4.15
CAMLOC FASTENER 2600-8S	2600-8S	$3.40
CAMLOC FASTENER 2600-9S	2600-9S	$3.25
CAMLOC FASTENER 2600-10S	2600-10S	$3.90


CAD PLATED PHILLIPS

Description	Part Number	Price	Buy
CAMLOC FASTENER 26S8-1	268S-1	$3.05
CAMLOC FASTENER 26S8-2	26S8-2	$2.65
CAMLOC FASTENER 26S8-3	26S8-3	$2.35
CAMLOC FASTENER 26S8-4	268S-4	$1.90
CAMLOC FASTENER 26S8-5	268S-5	$2.20
CAMLOC FASTENER 26S8-6	268S-6	$2.20
CAMLOC FASTENER 26S8-7	268S-7	$2.20
CAMLOC FASTENER 26S8-8	268S-8	$2.20
CAMLOC FASTENER 26S8-9	268S-9	$2.10
CAMLOC FASTENER 26S8-10	268S-10	$2.20
CAMLOC FASTENER 26S8-14	268S-14	$2.90



2600, 2700 SERIES RETAINING WASHER Retaining washers are required for studs of -5 length or greater. Use split washer 2600- SW2 where it is desirable to have the stud fall away for minimum internal projection. Use internal tooth washer 2600-LW where it is desirable to retain the stud assembly rigidly.

PN 2600-SW-2 $0.51	PN 2600-LW $0.15

2600, 2700 SERIES RETAINING WASHER

Rivet Holes	2600, 2700 Series Part No.	Price	Buy
Plain	212-12N	$3.10
Countersunk	212-12ND	$2.40

Copyright © 1995 - 2010 Aircraft Spruce and Specialty Co. All rights reserved. Prices shown are in USD.
Prices, features, and specifications are subject to change without notice.
Images are for reference only and actual product appearance may vary.